Guide to Install Shower Screens Perfectly
A shower screen prevents water splashes in the bathroom. It is attached to the wall or ceiling with a guide rail and a support rod. They are available in different sizes. In this guide, you will learn everything about shower screen installation.
A shower screen protects against water splashes
A walk-in shower or bathtub can be partitioned off from the rest of the bathroom, like a type of enclosed shower stall. Installing sliding glass doors in Melbourne will prevent water from splashing around in your bathroom. Shower screens mostly consist of a fixed glass wall made of safety glass, which is mounted on a rail. Some models have folding or sliding doors.
Whether in standard sizes or made to measure, transparent or frosted glass, single or double glazed — shower screens bring more comfort, safety and aesthetics to every bathroom.
Installing your shower screen will take 5 steps
- Preparation of work environment and required material
- Installing the rail and profile
- Attaching the joints
- Installation of the glass wall
- Fixation of the strut
Know-how
Installing a shower screen is quick and easy. You don’t need any special knowledge, just some manual skills. To attach a shower screen, you should be able to measure correctly, use a spirit level and drill a hole with a drill. Choosing the right anchors isn’t difficult, and applying a silicone joint with a silicone syringe is child’s play.
Pay particular attention to the following points:
1. Follow the instructions. You must comply with the prescribed minimum distances between the shower system and switches and sockets. In this way, possible risks of electric shock in the wet areas are eliminated.
Where are the cables and where are the sockets? All of this must be checked before assembly. When you get the best shower screens in Melbourne, you will get all such information beforehand from the seller.
2. How stable are the walls in the planned shower area? You should use this to determine whether you are installing a glass door with wall hinges, for example, a shower with an inner door — possible with stable walls — or a door with a fixed glass part such as our shower doors for niches — with less stable walls. Tip: If you use lightweight walls in the area of the shower wall attachment, it is advisable to reinforce them from behind during the construction phase.
3. Decide whether you want a classic raised shower tray or a floor-level shower. For the floor-level, barrier-free variant, you must check whether the necessary installation height in the floor is sufficient to ensure the necessary gradient of the drain pipe from the siphon to the downpipe. The gradient should be at least 1 centimetre per 1-meter pipe length of the drain pipe.
4. What sanitary items are in the vicinity of the shower? Make sure these do not interfere with the opening of the shower door. If you use a door that opens inwards, such as a folding door, you should make sure that it can be folded in despite the shower fitting.
5. Are the walls straight? These may only be as crooked or curved as the adjustment range of the new shower cubicle allows.
6. Where do flush-mounted supply lines run? Drilling is not possible in these areas.
To conclude,
You must check the vertical structure and the opening of the doors again at the end. If necessary, balance the doors with the adjustment options and the fastening arms.
Only then can you completely siliconize the components. Please note, however, that the silicone must dry for at least 24 hours, and the shower system must not be used during this time. We wish you every success in installing your sliding glass doors in Melbourne!
